Care & Maintenance

Caring for your bathroom fixtures and fittings is important. You want your products to look as good in 20 years time as they do when new. Simple maintenance is required to ensure the longevity of your products.

Tapware & Accessories

  • Wipe gently over the surface with warm soapy water. If product is dry, soft cloth is recommended. No undue pressure is required.
  • DO NOT use any metallic souring pads and steel wool pads, solvents, bleaches, drain cleaning products or any other liquids or agents which could lead to staining or discoloration.
  • For Black tapware we recommend extra care to be taken. Be careful not to scratch the surface.
  • Fittings exposed to constant water such as shower heads or showering tapware should be periodically wiped down to avoid any build up of calcium from the water supply.
  • Aerators in the tapware must be cleaned. We recommend to undertake cleaning every 4 to 6 months.

    Toilets & Basins

  • To clean toilets and basins, use a mild soapy water and clean with a soft cloth.
  • DO NOT use any metallic souring pads and steel wool pads, solvents, bleaches, drain cleaning products or any other liquids or abrasive cleaning agents which could lead to staining, marking or discoloration.
  • Toilet seats should be cleaned using soapy water. Do not immerse hinges or any other part into antiseptic solutions.
  • DO NOT Place hot products onto the toilet such as curling wands.
  • DO NOT put any cleaning products into the cistern.
  • DO NOT stand on the toilet seat.
  • Ensure moveable parts such as toilet hinges are tightened and maintained regularly.

    Stainless Steel Sinks

  • Wash with a mild soap or mild detergent and then rinse thoroughly daily with fresh tap water.
  • For heavier cleaning, use a paste of bicarbonate soda or a soft bristle brush. Rub in the direction of the polished surface as softly as possible. Rinse with fresh tap water.
  • DO NOT use any metallic souring pads and steel wool pads, solvents, bleaches, drain cleaning products or any other liquids or agents which could lead to staining or discoloration.

    Acrylic Baths

  • To preserve the high gloss polished surface, after using your bath, clean with a soft cloth and warm soapy water to wash away body oils and soap residue that forms a ring tidemark.
  • We recommend using warm soapy water as a weekly cleaner. Do not use powders, pastes, cream cleaners, thinners, and window cleaning sprays or dry cleaning liquid.
  • For stubborn spots use baking soda on the sponge and rub gently in a circular motion.
  • If you are using coloured essentials oils, first test that the colour will not stain you bath never pour them into an empty bath. Always add oils into a bath full of water.
  • When using a spa bath, only use half of the quantity of oils or bubble bath that you would normally use in your bath.

    Marblo Basins & Bathtubs

  • Day to day cleaning, After use, remove any residue from soap, shaving or brackish water by rinsing and a quick wipe over with a damp cloth or sponge.
  • When conducting your regular bathroom cleaning, simply wipe over the surface of your Marblo bathware product with a mix of 5% Lemon Jif Cream Cleanser to 95% warm soapy water. An ammonia-based cleaner such as Spray-and-Wipe can also be used. Rinse and wipe over using a clean damp sponge. To remove build-up of lime, hard water scale or soap residue, use a standard household lime remover, rinse well.
  • In the event of a spill of harsh household chemicals, dyes or the like, in most cases staining can be prevented with minimal effort. Immediately clean with a damp sponge, using appropriate safety measures and wipe over with soapy water. Clean the entire surface using a mix of 5% Lemon Jif to 95% warm soapy water applied using a damp sponge. If the spill has not been totally removed, clean the entire surface with 10% diluted Lemon Jif Cream Cleanser and a wet sponge, in a circular motion. To maintain uniformity, do not apply too much pressure nor rub in the same area for a prolonged time. Rinse well and wipe clean. This will restore a matte / sheen lustre to the surface of your product.